CENTER mode Switch opoeration mode to "CENTER mode". See "Switching between CENTER/FIX Modes" below for details on changing operating modes. Press the [SCOPE] button momentarily to display the scope screen. The current freqency is displayed in the center. Width of scope display can be set in the Menu item "128 CENTER SPAN FREQ".

FIX mode Switch opoerating mode to "FIX mode". See "Switching between CENTER/FIX Modes" below for details on changing operating modes. Press the [SCOPE] button momentarily to display the scope. The freqency set in Menu Mode is displayed at the left most start point on the screen. Width of scope display can be set in Menu Mode by individual band (See below).

Switching Between CENTER/FIX Modes Press the[MENU] button to enter the Menu mode. Rotate the [VFO-B/CLAR] knob (or press the [▲/▼] button) to select the "CENTER" or "FIX" to select Menu item "124 SCOPE MODE". Press the [SELECT] button, then rotate the [VFO-B/CLAR] knob (or press the [▲/▼] button) to select the "CENTER" or "FIX" (Factory default is "CENTER"). Press the [SELECT] button, then press the [MENU] button to save the new setting and exit to normal operation.

Cont'd Next Page "Scope"