Note: Since the FTDX1200 has only one receiver the audio will be muted while the spectrum scope in scanning.

Select an operating mode for the scope function, either CENTER or FIX mode. ADVICE: See the instructions on the next page for details on individual operating modes. Press the [SCOPE] button momentarily to display the scope screen. Five different screens are shown of the TFT display by pressing the [SCOPE] button. ADVICE: During continuous sweeping, no audio will be heard. Sweep speed can be changed in the Menu item "125 SCOPE SPEED". The received sound spectrun is displayed on the AF-FFT screen. Press the [MONI] button to display the received station's transmission signal spectrum. On the AF-FFT screen, either the "Spectrum Display" or the "Waterfall Display" can be selected in the Menu item "185 FFT DISPLAY MODE" Sweep Mode MANUAL mode Each time the [SELECT] button is pressed, a new scan of the spectrum scope is shown on the TFT display. ASC (Automatic Spectrum-Scope Control) mode Press the [AUTO] button to access the ASC mode. "AUTO" icon is indicated in red on the spectrum soope display. While the MAIN DIAL is turned slowly, the spectrum scope does not change. When the MAIN DIAL is turned quickly the audio is muted and the spectrum scope is scanned continually and displayed on the spectrum scope screen until the MAIN DIAL is completely stopped. When the spectrum scope scanning is stopped, the audio is restored. The last scan is shown on the TFT display. Listen to the station and slowly fine tune the station. ADVICE: By setting the "126 SCOP AUTO TIME" menu mode sweeping can be carried out automatically at the preset interval. Continous mode Press the [AUTO] button and holdfor 1 second. The audio is muted and the spectrum scope is scanned continuously until the [AUTO] button is pressed again.

Cont'd Next Page "Scope"