077 DATA MIC GAIN
Function: Sets the data input level from the TNC to the AFSK modulator.
Available Values: MCVR, 0 ~ 100
Default Setting: MCVR30
When this menu is set to "MCVR", you may adjust the microphone gain using the front panel [MIC/SPEED] knob.
078 DATA OUT LEVEL
Function: Sets the AFSK data output level at the output port (pin 5) of the RTTY/PKT jack.
Available Values: 0 ~ 100
Default Setting: 50
079 DATA VOX GAIN
Function: Adusts the "VOX" Gain in the DATA mode.
Available Values: 0 ~ 100
Default Setting: 50
080 DATA VOX DELAYN
Function: Adusts the "VOX" Delay (receiver recovery) time in the DATA mode.
Available Values: 30 ~ 3000 msec (10 msec/step)
Default Setting: 300 msec
End of Menu Item Details
"Mode Data Group"
MODE-FM GROUP
081 FM LCUT FREQ
Function: Selects the cutoff frequency of the lower side of the RX audio filter in the FM mode.
Available Values: OFF, 100 ~ 1000 Hz (50 Hz/step)
Default Setting: 250
082 FM LCUT SLOPE
Function: Selects the filter slope of the lower side of the RX audio filter in the FM mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
083 FM HCUT FREQ
Function: Selects the cutoff frequency of the upper side of the RX audio filter in the FM mode.
Available Values: OFF, 700 ~ 4000 Hz (50 Hz/step)
Default Setting: OFF
|
084 FM HCUT SLOPE
Function: Selects the filter slope of the upper side of the RX audio filter in the FM mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 6dB/oct
085 FM MIC GAIN
Function: Sets the microphone gain for the FM mode.
Available Values: MCVR, 0 ~ 100
Default Setting: MCVR
When this menu is set to "MCVR", you may adjust the microphone gain using the front panel [MIC/SPEED] knob.
086 FM MIC SELECT
Function: Selects the microphone to be used on the FM mode.
Available Values: FRONT or DATA
Default Setting: FRONT
FRONT Selects the microphone connected to the front panal MIC jack while using the FM mode.
DATA Selects the microphone connected to pin 1 of the PACKET jack while using the FM mode.
087 RPT SHIFT (28 MHz)
Function: Sets the magnatude of the repeater shift on the 28 MHz band.
Available Values: 0 ~ 1000 kHz (50 kHz/step)
Default Setting: 100 kHz
088 RPT SHIFT (50 MHz)
Function: Sets the magnatude of the repeater shift on the 50 MHz band.
Available Values: 0 ~ 4000 kHz (10 kHz/step)
Default Setting: 100 kHz
089 TONE FREQ
Function: Select the desired CTCSS Tone. A total of 50 standard CTCSS tones are provided (see the CTCSS Tone Chrt on page 91).
Available Values: 67.0 ~ 254.1 Hz
Default Setting: 67.0 Hz
End of Menu Item Details
"Mode FM Group"
|