Page 114 FTDX1200 Operating Manual

MENU MODE Cont'd
Previous Page    Index of Topics    Table of Contents    Index of Pages    Next Page
MENU ITEM DETAILS Cont'd
025 NUMBER STYLE
Function: Selects the Contest Number "Cut" format for an imbedded contest number.
Available Values: 1290, AUNO, AUNT, A2NO, A2NT, 12NO or12NT
Default Setting: 1290

1290: Does not abbreviate the Contest Number.

AUNO: Abbreviates to "A" for "One", "U" for "Two", "N" for "Nine", and "O" for "Zero".

AUNT: Abbreviates to "A" for "One", "U" for "Two", "N" for "Nine", and "T" for "Zero".

A2NO: Abbreviates to "A" for "One", "N" for "Nine", and "O" for "Zero".

A2NT: Abbreviates to "A" for "One", "N" for "Nine", and "T" for "Zero".

12NO: Abbreviates to "N" for "Nine", and "O" for "Zero".

12NT: Abbreviates to "N" for "Nine", and "T" for "Zero".

026 CONTEST NUMBER
Function: Enters the inital contest number that will increment/decrement after sending during contest QSOs.
Available Values: 0 ~ 9999
Default Setting: 1

027 CW MEMORY 1
Function: Permits entry of the CW message for memory register 1.
Available Values: TEXT or MESSAGE
Default Setting: MESSAGE

TEXT: You may enter the CW message from the FH-2.

MESSATE: You may enter the CW message from the CW keyer.

028 CW MEMORY 2
Function: Permits entry of the CW message for memory register 2.
Available Values: TEXT or MESSAGE
Default Setting: MESSAGE

TEXT: You may enter the CW message from the FH-2.

MESSATE: You may enter the CW message from the CW keyer.

029 CW MEMORY 3
Function: Permits entry of the CW message for memory register 3.
Available Values: TEXT or MESSAGE
Default Setting: MESSAGE

TEXT: You may enter the CW message from the FH-2.

MESSAGE: You may enter the CW message from the CW keyer.

030 CW MEMORY 4
Function: Permits entry of the CW message for memory register 4.
Available Values: TEXT or MESSAGE
Default Setting: TEXT

TEXT: You may enter the CW message from the FH-2.

MESSAGE: You may enter the CW message from the CW keyer.

031 CW MEMORY 5
Function: Permits entry of the CW message for memory register 5.
Available Values: TEXT or MESSAGE
Default Setting: TEXT

TEXT: You may enter the CW message from the FH-2.

MESSAGE: You may enter the CW message from the CW keyer.

End of "Keyer Group"

GENERAL GROUP
032 ANT SELECT
Function: Sets the method of antenna selection.
Available Values: BAND or STACK
Default Setting: BAND

BAND: The antenna is selected in accordance with the operating band.

STACK: The antenna is selected in accordance with the band stack (different antennas may be utilized on the same band, if so selected in the band stack).

033 ANT2 SETTING
Function: Sets the operating mode of the ANT 2 connector.
Available Values: TRX or RX
Default Setting: TRX

TRX: ANT 2 used for TX and RX.

RX: ANT 2 used for RX only.

034 NB LEVEL
Function: Adjusts the noise blanking level of the IF Noise Blanker for shor duration pulse noise.
Available Values: 0 ~ 100
Default Setting: 50

035 BEEP LEVEL
Function: Sets the beep level.
Available Values: 0 ~ 100
Default Setting: 50

036 MONITOR LEVEL
Function: Sets the Monitor level.
Available Values: 0 ~ 100
Default Setting: 50

Cont'd Next Page Menu Item Details "General Group"

Cont'd Next Page "Menu Mode"
Previous Page    Index of Topics    Table of Contents    Back to Top    Index of Pages    Next Page
Page 114 FTDX1200 Operating Manual